Why Does a VPN Say Connected but Have No Internet?
A VPN can display “Connected” even when websites and apps cannot access the internet. The status indicates that the VPN app has established a connection with its server, but it does not guarantee that DNS requests are resolving or that internet traffic is reaching its destination.
The problem usually involves one of five areas:
- DNS cannot resolve website names into IP addresses.
- Traffic is not following the intended VPN route.
- A Kill Switch or system-level VPN setting is blocking unprotected traffic.
- Split tunneling or proxy rules are sending traffic through an unexpected connection.
- A firewall or network filter is interfering with the VPN.
The best way to fix the problem is to identify where the connection fails before changing your settings.
How to Identify What’s Causing the Problem
Start by checking whether the problem affects one website, one application, or your entire device.
If your internet also fails when the VPN is disconnected, the problem is probably outside the VPN tunnel. Check your Wi-Fi or mobile data first. On hotel, airport, or public Wi-Fi, complete the network’s sign-in page before reconnecting.
If only one website or app is affected, follow our complete VPN troubleshooting guide for service-specific checks.
How to Fix VPN Connected but No Internet
Work through these fixes in order. After each change, test the same website or application again. This makes it easier to identify which setting caused the problem.
1. Check Whether a Kill Switch Is Blocking Your Internet
A VPN Kill Switch blocks internet traffic when the VPN tunnel becomes unavailable. This helps prevent your device from sending traffic through your regular connection without VPN protection.
However, it can also make your device appear offline when the VPN disconnects or repeatedly attempts to reconnect.
First, identify when internet access stops:
- The VPN says Connected, but nothing loads: investigate DNS, routing, and other connection settings.
- The VPN repeatedly disconnects and reconnects: the Kill Switch may be blocking traffic during interruptions.
- Internet access remains blocked after you disconnect: check whether a persistent traffic-blocking setting is enabled.
If you use BearVPN, its Automatic Kill Switch is designed to block traffic when the VPN connection drops unexpectedly.
On Android, also check the operating system’s VPN settings:
- Open Settings and search for VPN.
- Select the VPN configuration you are using.
- Check whether Always-on VPN is enabled.
- If your device provides a Block connections without VPN option, check whether it is enabled.
- Confirm that the VPN is connected and working before changing any protection settings.
Android menu options vary by manufacturer and configuration. See Google’s Android VPN instructions.
Important: Do not immediately disable your Kill Switch to restore internet access. Doing so may allow traffic to leave through your ordinary connection, exposing your regular public IP. If a temporary test is necessary, pause sensitive activity and restore your protection immediately afterward.
2. Try Another VPN Server or Connection Mode
The selected VPN server or connection route may be experiencing a temporary problem.
A VPN can establish a connection successfully while the selected server still has difficulty reaching certain destinations.
Try the following:
- Disconnect from the current server.
- Select another available server, preferably in the same region.
- Reconnect and test the same websites and applications.
- If the problem continues, check whether your VPN app offers another supported connection mode.
- Test one alternative while keeping the server and other settings unchanged.
Pay attention to the result:
- Another server works: the original server or its route may have been responsible.
- Another connection mode works: the previous mode may have encountered a network compatibility issue.
- Every server fails on the same network: investigate the network, DNS, and device settings.
- The VPN works on another network: compare the original network’s filtering and routing behavior.
Do not assume that every VPN provider supports the same protocols. Use only the connection modes available in your app.
3. Check and Fix DNS Problems
DNS translates website names into IP addresses. If DNS resolution fails, your VPN may remain connected while browsers display messages such as:
- DNS server isn’t responding.
- Server IP address could not be found.
- This site can’t be reached.
If these errors appear across several websites, DNS is worth investigating.
Check your VPN’s DNS configuration.
If you previously configured a custom DNS server, record its current value first.
Then:
- Open your VPN app’s connection or network settings.
- Look for a DNS option, if available.
- Restore the provider’s recommended or default DNS configuration.
- Reconnect to the VPN.
- Open the same websites again.
Do not replace a working DNS configuration without evidence that DNS is causing the problem.
Test DNS resolution on Windows or macOS.
If you are comfortable using command-line tools, open Command Prompt or Terminal and run:
nslookup example.com
If the command returns an IP address, DNS successfully resolved that domain for this request. It does not prove that the VPN route or website connection is working.
If the lookup times out or returns no address, investigate the DNS resolver and its connection path.
A successful DNS lookup followed by failed browsing points toward another possible issue, such as routing, filtering, or the destination itself.
Check Chrome Secure DNS.
If Chrome fails while other browsers work, its Secure DNS configuration may be involved.
- Open Chrome Settings.
- Go to Privacy and security → Security.
- Find Use secure DNS.
- If you selected a custom provider, test the automatic or current-provider option.
- Reload the affected website.
If browsing returns, investigate the custom DNS provider before changing your device-wide DNS settings.
See Google’s Chrome Secure DNS instructions.
Clear the Windows DNS cache.
If the problem may involve outdated or cached DNS records:
- Open Command Prompt.
- Run:
ipconfig /flushdns
- Wait for the confirmation message.
- Reopen your browser and test the website again.
This command clears the local DNS resolver cache. It does not change your DNS provider or repair a failed VPN server.
See Microsoft’s ipconfig documentation.
4. Check Split Tunneling, Proxy, and Routing Rules
Split tunneling allows different applications or domains to use different network paths.
Depending on the selected mode, some traffic uses the VPN tunnel while other traffic connects directly through your regular internet connection.
Incorrect routing rules can cause an application or website to use a connection path you did not intend.
To investigate:
- Open your VPN app’s Split Tunneling settings.
- Review the rules for the affected application or domain.
- Check whether the traffic is included in or excluded from the VPN.
- Confirm that the selected routing mode matches what you want.
- Restart the affected application and reconnect the VPN if necessary.
- Test the same website or application again.
There are two important routing configurations:
- Only use VPN: Selected applications or domains use the VPN, while other traffic uses the regular connection.
- Exclude from VPN: The VPN is used by default, but selected applications or domains connect directly.
These modes produce different results. An application excluded from the VPN will not use the VPN server’s public IP.
If you temporarily return to a full-tunnel configuration for testing, confirm that all traffic is expected to use the VPN before browsing. Do not remove routing rules blindly, especially if your configuration intentionally sends only selected traffic through the VPN.
Also check for other possible routing conflicts:
- A manually configured system proxy.
- A browser proxy extension.
- Another active VPN connection.
- Network-filtering software that redirects traffic.
Disconnect another personal VPN for a controlled test if necessary. Do not remove workplace or school VPN profiles without administrator approval.
For more details, see BearVPN’s Split Tunneling guide.
5. Check Firewall and Security Software
A firewall, antivirus network filter, or other security application may block the VPN app or interfere with its network traffic.
Before changing anything, look for evidence of a specific conflict.
- Open your firewall or security software.
- Check its notifications, blocked-connection history, or activity log.
- Look for entries involving your VPN app or its network components.
- Review the app’s network permissions and allow-list settings.
- If a specific rule is blocking the VPN, correct that rule according to the software provider’s instructions.
- Reconnect the VPN and test again with your protection enabled.
If the cause is still unclear, follow the security software provider’s instructions for a brief, controlled test on a personal device. Test only the suspected component and restore protection immediately.
If the VPN works only while a security component is paused, correct the specific blocking rule instead of leaving your firewall or antivirus disabled.
For work or school devices, ask your network administrator to review the relevant firewall and VPN policies.
VPN Connected but No Internet on Different Devices
Some network settings are specific to your operating system. Use the checks below when the problem appears limited to one device.
Windows: If DNS errors appear, try the DNS checks above. If you use Windows’ built-in VPN instead of a provider’s app, verify that the server address and connection configuration match the details supplied by your provider.
macOS: Review the VPN configuration and any network filters or proxy settings that may redirect traffic. If another security application was recently installed, check whether it changed your network configuration.
Android: Check whether Always-on VPN or Block connections without VPN is enabled. If you previously configured a custom Private DNS provider, record the setting and test the automatic option if available.
iPhone and iPad: Open Settings → General → VPN & Device Management and review the installed VPN and configuration profiles. Do not delete an unfamiliar or managed profile just to restore internet access. Removing a profile may also remove settings and access associated with it.
See the official instructions for Android VPN settings and Apple configuration profiles.
What If Only Large Websites or Downloads Fail?
If small websites load but larger pages, downloads, or uploads repeatedly stall, the problem may involve packet size or fragmentation rather than DNS.
VPN encapsulation adds overhead to network packets. On some network paths, this can create Maximum Transmission Unit (MTU) or path-MTU issues.
Look for these symptoms:
- Small pages load, but larger pages stall.
- Downloads stop before completion.
- Some applications work while others repeatedly time out.
Do not copy a fixed MTU value from another VPN tutorial or disable IPv6 without identifying the problem.
If these symptoms persist, contact your VPN provider and ask whether the connection may involve an MTU, fragmentation, or IPv6 routing issue. Provide the device, network, server, and connection mode you tested.
How to Verify Your VPN Is Working Again
After applying a fix, check both internet access and VPN routing.
- Reconnect to your VPN and wait for the app to confirm the connection.
- Open two unrelated websites.
- Test another internet-connected application.
- Repeat the activity that originally failed.
- Open a public IP checker and compare the result with your original connection.
You can use BearVPN’s What Is My IP tool to compare your public IP address before and after connecting.
If the browser is supposed to use the VPN, the displayed public IP should normally reflect the VPN server rather than your original internet connection.
If you intentionally excluded that browser or domain through Split Tunneling, seeing your regular public IP is expected.
Remember that an IP check verifies the visible public IP for that browser connection. It does not independently confirm that every application is using the intended route.
When Should You Contact Your VPN Provider?
Contact your VPN provider if the internet still does not work after testing different servers, checking DNS, and reviewing routing and security settings.
Prepare the following information:
- Your device model and operating system version.
- Your VPN app version.
- The server location and connection mode you tested.
- Whether ordinary internet works without the VPN.
- Whether all apps fail or only specific websites and services.
- Any error messages or relevant connection logs.
- The changes you made and the results of each test.
Do not send your VPN password, private keys, recovery codes, or sensitive browsing history.
Providing these details helps support identify the problem without asking you to repeat every basic troubleshooting step.
Frequently Asked Questions
Why Does My VPN Say Connected but Have No Internet?
A connected status usually means the VPN app has established a session or tunnel with its server. However, DNS resolution, routing, firewall rules, or traffic restrictions may still prevent websites and applications from accessing the internet. Check whether the problem affects every application or only specific services before changing settings.
Why Does My Internet Stop Working When I Turn On My VPN?
Your VPN may be using a server or connection route that cannot reach the websites you want to visit. DNS conflicts, incorrect split tunneling rules, proxy settings, and security software can also interrupt traffic. Try another server first, then investigate DNS and routing settings.
Why Is My Internet Still Blocked After I Disconnect My VPN?
A Kill Switch may continue blocking traffic while the VPN connection is unavailable. Android’s Always-on VPN and Block connections without VPN settings can also restrict internet access, depending on your configuration. Check these settings before assuming your Wi-Fi or mobile data has stopped working.
Can Changing DNS Fix a VPN With No Internet?
It can help if DNS resolution is the problem, particularly when you use a custom DNS provider that is unavailable or conflicting with the VPN. However, changing DNS will not fix a failed VPN route, firewall restriction, or unavailable internet connection. Only change DNS when the symptoms point to a resolution problem.
Why Do Some Apps Work While Others Have No Internet With a VPN?
Different applications may use different DNS settings, proxies, or network routes. Split tunneling can also send selected applications through the VPN while others use your regular connection. Review the routing rules for the affected application and restart it after making changes.
Conclusion: Fix Your VPN Connection Without Guesswork
When your VPN says Connected but you have no internet, start by identifying whether the problem affects one application or your entire device. Then check Kill Switch behavior, compare another server, investigate DNS, and review routing and security settings.
Change one setting at a time and verify the result before moving to advanced troubleshooting. If the problem continues across multiple servers, contact your VPN provider with the diagnostic information you collected.
For other connection problems, see our complete VPN troubleshooting guide.

